清淤设备-清淤机械- 冠诚清淤机械-青州冠诚重工机械有限公司

冠诚清淤机：
绞吸式挖泥船的工作原理：

船首前端桥梁放到水面以下。通过桥架最前端绞刀的旋转将水下泥面挖松，并通过泥泵机所产生的负压吸力把泥沙从水下抽出，并吹送到上千米乃至上万米外的指定区域。达到疏浚航道和围海造地的双重目的。

其基本工作原理是通过船上离心式泥泵的作用产生一定的真空，把挖掘所得的泥浆吸入、泵出再通过船上输泥管线排出。其特点为：

1、在吸泥管的入口端，安装有旋转式的特制绞刀装置。

2、船尾安装有定位刚桩和钢桩起落装置，用于挖泥作业中船体的定位、横移摆动及纵向前移等。
3、泥泵泵出的泥浆通过船上的排泥管线和安装在船尾部的弯管与水陆排泥管线相连排出在指定的排泥区，以达到河道疏浚与围海造田的目的。

Crown-dredging machine:
Cutter suction dredger works:

Bow front end of the bridge into the water below. By rotating cutter bridge the forefront of the underwater dig loose soil surface, and by vacuum suction generated by the mud pumps to extract sand from underwater, and blown to the designated area on the meters or even kilometers away. Dual purpose of dredging waterways and land reclamation.

Its basic principle is to produce a certain vacuum vessel by the action of centrifugal mud pump, with the dredged mud suction pump out the mud and then discharged through the pipeline transport ship. Its characteristics are:

1, at the inlet end of the suction tube, there is mounted a special rotary cutter device.

2, mounted aft positioning just piles and piles of steel landing gear, dredging operations for locating the hull, swing and vertical sliding forward and so on.
3, the mud out of the mud pump mud by ship and pipeline installation at the elbow with the land and sea mud discharge pipe connected to the stern of the mud in the designated areas to reach river dredging and land reclamation purposes